Sailor 6215 VHF DSC Installationshandbuch PDF herunterladen (Seite 30)

Chapter 2: Operation

20 Scan

Scan

The radio has a scanning function for tagged channels. Any available channel,

including weather and private channels, can be tagged and added to the

scanning sequence. As default the radio scans with priority scanning of

channel 16. If a signal is received while in any scanning mode, only channel 16

continues to be watched.

If there is a signal in one of the scanned channels, the display shows the

channel in which the signal is received. Pressing PTT while a signal is received

stops scanning and the radio is tuned into the displayed channel.

Using SCAN

1. To start scanning press the soft key SCAN. The SCAN menu is shown. Press

START to start scanning.

2. To stop SCAN press SC STOP, or press PTT on the

speaking device.

3. To tag a channel to include in the scanning

sequence turn the selector wheel knob until the

wanted channel is in the display. Then press the

soft key TAG. The display shows the channel

number and the word TAG at the right side of the display.

4. To remove a channel from the scanning sequence, turn the selector wheel

knob until the tagged channel is displayed. Then press the soft key TAG to

remove the tag.

When scanning is activated the working channel is displayed in a different

format (open). This indicates the radio is not tuned into the displayed channel.

The displayed working channel is temporarily included in the scanning list

(although no TAG icon is shown).

If PTT is pressed while scanning, the scanning is stopped and transmission

starts immediately on the displayed working channel.

EXIT

TAG

[TAG]+[16]

PRIORITY SCAN

TAG

STOPSC

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 101 102

Keine Kommentare

Sailor 6215 VHF DSC Installationshandbuch Seite 30